waterproofing being sprayed onto the foundation of a house

Waterproofing Membranes

Products:


Ultra-Shield WB Waterproofing

Ultra-Shield WB Waterproofing is a polymer modified asphalt emulsion membrane. It is designed and recommended for use as the membrane component in an exterior wall waterproofing system. Ultra-Shield WB forms a tough, durable membrane which bridges shrinkage cracks and maintains its superior performance properties when exposed to the chemicals found in soil. Ultra-Shield WB meets the ICC-ES (AC29) acceptance criteria for cold, liquid applied below grade exterior waterproofing materials. ERS-2702

Data Sheet | SDS


Ultra-Shield SB Waterproofing

Ultra-Shield SB Waterproofing is a solvent-based polymer modified asphalt waterproofing membrane. The addition of rubber polymer in the coating enables the membrane to elongate up to 850%. Ultra-Shield SB also complies with EPA model standards for radon control.

Data Sheet | SDS


BoneDry® WPT Waterproofing

Bone Dry WPT is a modified asphalt emulsion developed for use as a high quality below grade waterproofing barrier. BoneDry WPT's low vapor permeance, outstanding adhesion, and superior combination of hardness and flexibility make it a great choice for any below grade waterproofing application. BoneDry WPT is an air cure membrane that will be fully cured in 24 hours. It can be used in conjunction with many types of protection/drainage boards to achieve the best system for your specific applications.

Data Sheet | SDS


1730 Ultra-Shield Waterproofing

1730 Ultra-Shield Waterproofing is a polymer modified asphalt waterproofing membrane. It complies with EPA Model Standard for radon control in new home construction. 1730 Ultra-Shield is manufactured to the highest quality control standards and in accordance with ISO 9001 requirements. ISO certification ensures that each gallon produced meets the highest quality control standards in the industry.

Data Sheet | SDS


BoneDry® RPT Waterproofing

Bone Dry RPT is an asphalt emulsion developed for use as a below grade waterproofing barrier. BoneDry RPT's outstanding adhesion, low vapor permeance and elongation up to 1200% make it a great choice for waterproofing application. Some typical applications include waterproofing residential basements and crawl spaces.

Data Sheet | SDS


Ultra-Shield AG

Ultra-Shield AG is a single component, polymer modified, asphalt emulsion air/vapor barrier. It is designed to provide a flexible, monolithic air, vapor and water barrier when applied over a wide variety of construction surfaces including masonry, concrete, exterior gypsum board, stone, wood and metal. Ultra-Shield AG cures to a tough, flexible, membrane capable of accommodating building movement while controlling air leakage into and out of conditioned living space. Ultra-Shield AG also meets and exceeds the Commonwealth of Massachusetts Building Code requirements for moisture control and air leakage.

Data Sheet | SDS


Ultra-Shield AG Vapor Permeable

Ultra-Shield AG is a single component, polymer modified, asphalt emulsion air/vapor barrier. It is designed to provide a flexible, monolithic air, vapor and water barrier when applied over a wide variety of construction surfaces including masonry, concrete, exterior gypsum board, stone, wood and metal. It cures to a tough, durable film with excellent elastomeric and crack bridging capabilities. Ultra-Shield AG has leakage rates of less than 0.001 L/s/sq. m. when tested in accordance with ASTM E 2178-03 - considerably below the 0.004 minimum required.

Data Sheet | SDS


GreyHound

GreyHound is a commercial grade water based all-polymer spray applied waterproofing emulsion. GreyHound is solvent free; therefore it is fully compliant with VOC regulations in all 50 states. It provides seamless waterproofing protection for the most difficult jobs with tremendous elongation, strength and adhesion. Designed for use on parged / unparged masonry and concrete substrates.

Data Sheet | SDS


GMX Elastomeric Coating

GMX Elastomeric Coating is a liquid applied, moisture cured, polyurethane coating. It is designed to form a seamless, flexible rubber membrane that is impervious to moisture. When cured, the coating permits expansion and contraction over a broad temperature range while maintaining its waterproofing properties under the most demanding conditions, including continuous exposure to water. It is available in three basic formulations: horizontal surfaces, vertical surfaces and two-component - for conditions which do not permit moisture curing.

Data Sheet | SDS


Ultra-Shield Self-Stick Membrane

Ultra-Shield Self-Stick Membrane is a prefabricated, self-adhering waterproofing sheet membrane. It is composed of a durable, multi-layer polymer film that is coated with a proprietary rubberized asphalt adhesive. A release sheet protects the asphalt membrane and prevents the roll from sticking to it-self while it is stored and handled. The release sheet is removed as the membrane is installed. Typical applications include waterproofing foundation walls, plaza decks, and balconies. It can also be used under siding, exterior plaster and as a through wall flashing.

Data Sheet | SDS


GMX Hot Applied Waterproofing

GMX Hot-Applied Waterproofing is a premium grade waterproofing adhesive with superior adhesion characteristics, excellent low temperature flexibility and an unusually high softening point and penetration index. When used in conjunction with polyester, it forms a waterproofing system with superior tensile strength and elongation properties. It can be applied over a wide range of temperatures. The addition of rubber elastomers enables the membrane to adapt to the stress levels inherent in concrete slabs while continuing to provide excellent waterproofing, puncture and abrasion resistance.

Data Sheet | SDS

Image Gallery

BoneDry WPT being applied

USGBC LEED Logo